I recently brewed two batches.
I did masteron 200ml 100mg/ml and test prop 200ml 100mg/ml.
I used the same recipe for both 2%BA/18%ba.
Both bottles were washed with 91% alcohol and baked in a 350 degree oven for 2 hours covered in foil. I used a Nalgene bottle top filter .22.
The powder supplier I get from is very reputable and have done several batches of test cyp, tren E, and deca before from the same supplier no issues.
I noticed something wasn't right with the masteron right off the start because it did not want to dissolve in the ba/bb mixture in the beaker. It was more a green cloudy mess to start. I added heated oil and then figured there were impurities with the powder.
I ran it through the filter and the end product came out clear as can be. However there was a noticeable amount of "sludge" leftover in the filter. I decided to remix add a couple more ml's BB to help. Used a new filter and clear solution again with about half the sludge. I figured just shitty powder and did the prop right after same filter.
Here are two pics of the end product a week later. Masteron on the right prop on the left. I don't know what the crap is on the bottom of the masteron bottle and why it wouldn't be in the prop bottle as well.
Thoughts ?
I did masteron 200ml 100mg/ml and test prop 200ml 100mg/ml.
I used the same recipe for both 2%BA/18%ba.
Both bottles were washed with 91% alcohol and baked in a 350 degree oven for 2 hours covered in foil. I used a Nalgene bottle top filter .22.
The powder supplier I get from is very reputable and have done several batches of test cyp, tren E, and deca before from the same supplier no issues.
I noticed something wasn't right with the masteron right off the start because it did not want to dissolve in the ba/bb mixture in the beaker. It was more a green cloudy mess to start. I added heated oil and then figured there were impurities with the powder.
I ran it through the filter and the end product came out clear as can be. However there was a noticeable amount of "sludge" leftover in the filter. I decided to remix add a couple more ml's BB to help. Used a new filter and clear solution again with about half the sludge. I figured just shitty powder and did the prop right after same filter.
Here are two pics of the end product a week later. Masteron on the right prop on the left. I don't know what the crap is on the bottom of the masteron bottle and why it wouldn't be in the prop bottle as well.
Thoughts ?
Attachments
Last edited: