Any chefs here? Need some recipes.

[SL1CED]

Looking for some slightly higher dosed stuff or blends in general. I'd like to refrain from using much, if any EO. If you guys got some please let me know. Here's what I'm looking for;

Tren Ace- 120mg/ml
Mast Prop-120mg/ml
NPP-120mg/ml
Test Prop- 120mg/ml
Test E- 333mg/ml
EQ-333mg/ml
Deca-333mg/ml
Test E/Deca Blend- 333mg/ML each
Test E/EQ- 333mg/ML each
Test Prop/NPP- 66mg/ml each
Test P/Tren A- 120mg Test Prop/60mg Tren Ace per ML
Tren A/Mast P/Test P- 60mg Tren A/60mg Mast P/60mg Test P

The amount of powder I'm fine, that's just math. I'm trying to figure out which solvents and how much of each. Thank you.

 

[Collinb]

Every one of those is doable without EO im pretty positive. If you look through threads here for blends and conversions, you can find recipes for some higher dose things like that, many dont include EO. I think the test blends with deca and eq might need eo to hold though, with 333 each that may not hold well if at all.

 

[SL1CED]

All of those other ones are fine with 1-2 BA & 18-20 BB with GSO?

Brewing doesn't seem to difficult at all. Kind of curious.

 

[Collinb]

Test E/C/D @ 20mL 500mg/mL

150mg/mL Test E - 30% [3 Grams]
150mg/mL Test Cyp - 30% [3 Grams]
200mg/mL Test Decanoate - 40% [4 Grams]

Grapeseed Oil - 7.5mL
5%BA - 1mL
20%BB - 4mL

2%/20% also works

Thats a high concentration blend with only oil.


Usually some of the blends listed in :
http://www.anasci.org/vB/anabolic-steroid-conversions/28523-aas-conversions-blends.html

Involve a level of EO, since you arent going much above the usually number of 100 for short esters it should be ok, but if you are worried Id include at least 25% of the oil as EO and hte rest GSO or even 20% just to add a little help. If you are worried and want to completely avoid EO Id say make a very small batch of the product, like a 5ml dose of tren at 150 or 125 like you want with only GSO and hold it over night to see if it holds. If it doesnt change something and try again.

 

[FordFan]

If its an allergic reason, try maybe a small amt of eo (5-10%). A small amt makes a difference when thinning the product.

 

[powders101]

Test E/C/D @ 20mL 500mg/mL

150mg/mL Test E - 30% [3 Grams]
150mg/mL Test Cyp - 30% [3 Grams]
200mg/mL Test Decanoate - 40% [4 Grams]

Grapeseed Oil - 7.5mL
5%BA - 1mL
20%BB - 4mL

2%/20% also works

Thats a high concentration blend with only oil.


Usually some of the blends listed in :
http://www.anasci.org/vB/anabolic-steroid-conversions/28523-aas-conversions-blends.html

Involve a level of EO, since you arent going much above the usually number of 100 for short esters it should be ok, but if you are worried Id include at least 25% of the oil as EO and hte rest GSO or even 20% just to add a little help. If you are worried and want to completely avoid EO Id say make a very small batch of the product, like a 5ml dose of tren at 150 or 125 like you want with only GSO and hold it over night to see if it holds. If it doesnt change something and try again.

I agree with the above.

 

[delcapone]

Test e - 30mls@ 333mgs/ml
Powder = 10gr.
G.s.o. = 15.6gr
Ba. = .9 (3%)
Bb = 6ml (20%}
I prefer 50/50 gso/eo makes for a lighter smoother compound . With less pip ,and faster dissapation . You can also use a smaller gua. Needle.
i.m.h.o. I would stick to 300mgs. Or less. Using b.b. E.o. Everything u.s.p.grade all i made above had to much pip. In fact with test i dont go over 250. Deca and e.q. Are a diff. Story. Just my opinion

 

[Collinb]

I made Test E 400, with 75% EO - 25% Canola oil, 2/20, and held fine and no pip when shot in quads. Although some people do handle it better htan others as I used one sources gear once and gave some to a friend and he had bad pip where as I didnt.